Wang, J, Peng, L.F., Deng, Y.J., Lai, X.M.*, Fu, M.W.*, Ni, J. A finite strain thermodynamically-based constitutive modeling and analysis of viscoelastic-viscoplastic deformation behavior of glassy polymers. International Journal of Plasticity, 2019, Volume 122, Pages 135-163.
Qiu, D., Peng, L., Lai, X., Ni, M., Lehnert, W. Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell. Renewable and Sustainable Energy Reviews, 2019, 113,109289.
Zhang, D., Yi, P., Peng, L., Lai, X., Pu, J. Amorphous carbon films doped with silver and chromium to achieve ultra-low interfacial electrical resistance and long-term durability in the application of proton exchange membrane fuel cells. Carbon, 2019, Volume 145, Pages 333-344.
Shao, H., Qiu, D., Peng, L., Yi, P., Lai, X.* In-situ measurement of temperature and humidity distribution in gas channels for commercial-size proton exchange membrane fuel cells. Journal of Power Sources, 2019, Volume 412, Pages 717-724.
Yi, P., Li, X., Yao, L., Fan, F., Peng, L., Lai, X.* A lifetime prediction model for coated metallic bipolar plates in proton exchange membrane fuel cells. Energy Conversion and Management, 2019, Volume 183, Pages 65-72.
Yi, P., Zhang, D., Qiu, D., Peng, L., Lai, X. Carbon-based coatings for metallic bipolar plates used in proton exchange membrane fuel cells. International Journal of Hydrogen Energy, 2019, Volume 44, Issue 13, Pages 6813-6843.
Deng, Y., Wang, J., Yi, P., Peng, L., Lai, X.*, Lin, Z. Numerical Studies on Size Effect Behaviors of Glassy Polymers Based on Strain Gradient Elastoviscoplastic Model. Journal of Applied Mechanics, Transactions ASME, 2019, Volume 86, Issue 2 , 021001.
Yi, P., Zhang, D., Peng, L., Lai, X.*. Impact of Film Thickness on Defects and the Graphitization of Nanothin Carbon Coatings Used for Metallic Bipolar Plates in Proton Exchange Membrane Fuel Cells. ACS Applied Materials and Interfaces, 2018, Volume 10, Issue 40 , Pages 34561-34572
Xu ZT, Peng LF, Fu MW, Lai XM*. Size effect affected formability of sheet metals in micro/meso scale plastic deformation: Experiment and modeling. International Journal of Plasticity, 2015, 68: 34-54.
Mao MY, Peng LF, Yi PY and Lai XM* 2015 Modeling of the Friction Behavior in Metal Forming Process Considering Material Hardening and Junction Growth ASME-Journal of Tribology 138 012202
Yi PY, Shu YY, Deng YJ, Peng LF, Lai XM*. Mechanism of forming defects in roll-to-roll hot embossing of micro-pyramid arrays I: experiments. IOP-Journal of Micromechanics and Microengineering, 2015, 25(10): 105017.
Wang J, Yi PY, Deng YJ, Peng LF, Lai XM*, Ni J. Mechanism of forming defects in roll-to-roll hot embossing of micro-pyramid arrays: II. Numerical study. IOP-Journal of Micromechanics and Microengineering, 2015, 25(11): 115030.
Deng YJ, Yi PY, Peng LF, Lai XM*, Lin ZQ 2015 Flow behavior of polymers during the roll-to-roll hot embossing process IOP-Journal of Micromechanics and Microengineering. 25 065004.
Zhang CP, Yi PY, Peng LF, Lai XM*, Ni J. Fabrication of Moth-eye Nanostructure Arrays using roll-to-roll UV-Nanoimprint Lithography with an Anodic Aluminum Oxide mold. IEEE-Nanotechnology, 2015,14(6):1127-1137.
Yi PY, Wu H, Zhang CP, Peng LF, Lai XM*. Roll-to-roll UV imprinting lithography for micro/nanostructures. AIP-Journal of Vacuum Science & Technology B, 2015, 33(6): 060801.
Qiu DK, Yi PY, Peng LF, Lai XM. Channel Dimensional Error Effect of Stamped Bipolar Plates on the Characteristics of Gas Diffusion Layer Contact Pressure for Proton Exchange Membrane Fuel Cell Stacks. ASME-Journal of Fuel Cell Science and Technology, 2015, 12(4): 041002.
Gao ZY, Peng LF, Yi PY, Lai XM. Grain and geometry size effects on plastic deformation in roll-to-plate micro/meso-imprinting process. Journal of Materials Processing Technology, 2015, 219: 28-41.
Peng LF, Deng YJ, Yi PY and Lai XM* 2014 Micro hot embossing of thermoplastic polymers: a review J. Micromech. Microeng. 24 013001.
Peng LF, Lai XM*, Yi PY and Mai JM 2011 Design, Optimization, and Fabrication of Slotted-Interdigitated Thin Metallic Bipolar Plates for PEM Fuel Cells Journal of Fuel Cell Science and Technology-Transactions of the ASME 8 011002.
Lai XM*, Tian ZQ, Lin ZQ , A Simplified Method for Optimal Sensor Distribution for Process Fault Diagnosis in Multistation Assembly Processes, Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol.130, No.5, 051002-1~13, 2008
Cao J, Lai XM*, Wayne Cai, Jin S, Lin ZQ, Workpiece positioning analyses: The exact solutions and a quadratic variation approximation using the method of moments, Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol.130, No.6, 061013-1~10
Peng LF, Liu DA, Hu P, Lai XM*, Ni J, Fabrication of metallic bipolar plates for proton exchange membrane fuel cell by flexible forming process-numerical simulations and experiments, Journal of Fuel Cell Science and Technology, Transactions of the ASME, Vol.7, No.3, 031009-1~9,2010
Lai XM*, Li HT, Li CF, Lin Zhongqin, Ni Jun, Modeling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness, International Journal of Machine Tools and Manufacture, Vol.48, No.1, 1-14, 2008
Lai XM*, Zhang XY, Zhang YS, Chen Guanlong, Weld quality inspection based on online measured indentation from servo encoder in resistance spot welding, IEEE Transactions on Instrument and Measurement, Vol.56, No.4, 1501-1505, 2007
Lai XM*, Liu DA, Peng LF, Ni Jun, A mechanical-electrical finite element method model for predicting contact resistance between bipolar plate and gas diffusion layer in PEM fuel cells, Journal of Power Sources, Vol.182, No.1, 153-159,2008
Lai XM*, Peng LF, Hu P, Lan Shuhuai, Ni Jun, Material behavior modelling in micro/meso scale forming process with considering size/scale effects, Computational Materials Science, Vol.43, No.4, 1003-1009, 2008
Liu DA, Peng LF, Lai XM*, Effect of dimensional error of metallic bipolar plate on the GDL pressure distribution in the PEM fuel cell, International Journal of Hydrogen Energy, Vol.34, No.2, 990-997,2009
Hu P, Peng LF, Zhang WG, Lai XM*, Optimization design of slotted-interdigitated channel for stamped thin metal bipolar plate in PEMFC, Journal of Power Sources, Vol.187, 407-414,2009
Peng LF, Hu P, Lai XM*, Mei DQ, Ni J, Investigation of micro/meso sheet soft punch stamping process - simulation and experiments, Materials and Design, Vol.30, no.3, pp.783-790, 2009
Peng LF, Lai XM*, Liu DA, Hu P, Ni J, Flow channel shape optimum design for hydroformed metal bipolar plate in PEM fuel cell, Journal of Power Sources, Vol.178, No.1, 223-230, 2008
Li HT, Lai XM*, Li CF, Feng J, Ni J, Modelling and experimental analysis of the effects of tool wear, minimum chip thickness and micro tool geometry on the surface roughness in micro-end-milling, Journal of Micromechanics and Microengineering, Vol.18, No.2, 025006-1~12, 2008
Liu DA, Lai XM*, Ni J, Peng LF, Lan SH, Lin ZQ, Robust design of assembly parameters on membrane electrode assembly pressure distribution, Journal of Power Sources, Vol.172, No.2, 760-767, 2007
Li CF, Lai XM, Li HT, Ni J., Modeling of three-dimensional cutting forces in micro-end-milling, Journal of Micromechanics and Microengineering, Vol.17, No.4, 671-678, 2007
Peng LF, Liu F, Ni J, Lai XM, Size effects in thin sheet metal forming and its elastic-plastic constitutive model, Materials & Design, Vol.28, No.5, 1731-1636, 2007
Zhu WF, Wang H, Lai XM, Lin ZQ, Chen Y, A new method for fitting car doors allowing for the thermal effects of welding, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol.220, No.7, 891-900,2006
Chen GL, Zhou JQ, Cai Wayne, Lai XM, Lin ZQ, Menassa R, A framework for an automotive body assembly process design system, CAD Computer Aided Design, Vol.38, No.5, 531-539,2006
Peng LF, Lai XM, Li, MZ, Transition surface design for blank holder in multi-point forming, International Journal of Machine Tools and Manufacture, Vol.46, No.12-13, 1336-1342, 2006
Wang WR, Chen GL, Lin ZQ, Lai XM, Automated hierarchical assembly system construction in automobile body assembly planning, Journal of Mechanical Design, Transactions of the ASME, Vol.127, No.2, 347-351,2005