1998 ―2001, Dept. of Mechanical System Engineering University of Hiroshima, Doctor
1986 ―1989, Dept. of Power Machinery Engineering Xi'an Jiaotong University, Master
1983 ―1986, Dept. of Power Machinery Engineering Xi'an Jiaotong University, Bachelor

1986-1991: Research Associate, Xi'an Jiaotong University
1991-1997: Lecturer, Xi'an Jiaotong University
1994-1995: Visiting Scholar, Karlsruhe University
2001-2006: Assistant Professor, University of Hiroshima
2003-2004: Visiting Professor, Colorado School of Mines
2006-2009: Associate Professor, Tokyo Denki University
2009- : Professor, Shanghai Jiao Tong University

Liquid atomization and spray
Optical measurements for fuel spray & combustion
Engine combustion modeling and system optimization
Combustion in tubular flame burner
Alternative fuel combustion in engines
Reactive gas flow and combustion (modeling and experiment)

2018-2020 "Development of key techniques for characterizing atomization-evaporation-iginition processes and their correlations in engines", National Natural Science Foundation of China
2017-2019 "Development of novel combustion technologies for gas-turbine engine with flexible fuels", PI, Intergovernmental International Cooperation in Science and Technology Innovation, China Ministry of Science and Technology.
2014-2017 "Simultaneous measurement on vapor-liquid two-phase concentration distributions in multi-component fuel spray based on two-wavelength laser absorption and scattering", PI, National Natural Science Foundation of China
2014-2016 “Examination of detonation mechanism and its application in engine for emission reduction and efficiency improvement”, PI, Shanghai Education Commission Research and Innovation (Key) project
2013-2015 “Investigation of spray atomization and evaporation characteristics of superheated fluid”, PI, Ministry of National Education Foundation Ph.D.
2013-2014 “Fuel spray measurement and spray model calibration for DISI engine”, PI, Changan Automobile Company
2013-2014 “Spray characterization for optimization of diesel engine combustion system”, PI, Cummins East-Asia Research Center, Wuhan
2012-2013 “Fuel spray characterization and spray model calibration for DISI engine”, PI, Changan Automobile Company, Chongqing
2011-2012 “GDI engine fuel spray measurement for spray model calibration”, PI, Dongfeng Automobile Company, Wuhan
2011-2013 “Atomizing mechanism by flash boiling alcohol fuel”, PI, National Natural Science Foundation of China
2011-2012 “Dual-wavelength laser induced fluorescence for simultaneously measurement of drop-temperature and vapor-concentration measured, PI, State Key Laboratory Fund of Automotive Safety and Energy
2010-2012 “Investigation on alcohol fuel engine combustion system using flash-boiling atomization”, PI, Shanghai Pujiang Program

2006―2009 JSPS (Japan Society for the Promotion of Science) Project“A new laser diagnostics for fuel distributions in multi-component fuel spray”，project leader
2007―2009 Tokyo Denki University Project “Development of a new fuel injection nozzle for flexible fuel DISI engines”， project leader
2004―2007 NEDO (New Energy & Industrial Technol. Development Org.) Project “Comprehensive techniques for new generation low emission cars”，researcher
2002―2007 NEDO Project “Development of new generation burner system”，Researcher
2004―2007 JSPS Project “Mechanism of vortex breakup induced by combustion”，Researcher
2003―2004 Ministry of Education Project “A Tubular flame burner for combustion synthesis”， project leader
2003―2005 JSPS Project “Mixture formation characterization of fuel sprays in supercritical ambient fluid”， project leader

Book:
1. Satoru Ishizuka, Derek Dunn-Rankin, Robert Pitz, Robert Kee, Yuyin Zhang, etc. “Tubular Combustion”，Sustainable Energy Series，Momentum Press，ISBN: 1606503030, 192 pages, 2013

Journal Papers:
[2018]
1. Qianlong Wang, Yuyin Zhang, et al., Quantitative gaseous temperature and mole concentration measurements in spray generated mixture by P-xylene-PLIF imaging, Combustion Science and Technology, 190 (2018), No. 6, 949–966
2. Shiyan Li, Yuyin Zhang, Wenyuan Qi, Quantitative study on the influence of bubble explosion on evaporation characteristics of flash boiling spray using UV-LAS technique, Experimental Thermal and Fluid Science, 98 (2018) 472–479.
3. Wenyuan Qi and Yuyin Zhang, A three-color absorption/scattering imaging technique for simultaneous measurements on distributions of temperature and fuel concentration in a spray, Experiments in Fluids (2018) 59:70

[2017]
4. Yuyin Zhang, Shiyan Li, Wenyuan Qi, and Keiya Nishida, Evaporation characterization of fuel spray impinging on a flat wall by laser-based measurement, International Journal of Engine Research, 18(8) 776–784, 2017.10.15.
5. Shiyan Li, Yuyin Zhang, Wenyuan Qi, Bin Xu, Quantitative observation on characteristics and breakup of single superheated droplet, Experimental Thermal and Fluid Science, 80:05–312, 2017.1
6. Qianlong Wang, Yuyin Zhang, Liqiao Jiang, Daiqing Zhao, Philippe Guibert, Shunhua Yang, Fluorescence and absorption spectroscopy characteristics of p-xylene - application for temperature measurements, Applied Physics B (2017) 123:242, 2017.9
7. 张冠科，张玉银，齐文元，徐斌，柴油机缸内环境下碰壁喷雾的蒸发特性研究，内燃机工程38(5):1-8 , 2017.2
8. 刘利梁，张虎，张玉银，张伟，进气掺氢与富氧燃烧对汽油机性能影响的试验研究，车用发动机，第１期（总第228期），2017.2

[2016]
9. 梁毅，张玉银，李世琰，徐斌，基于化学反应动力学耦合G方程的定容弹爆震燃烧研究，车用发动机，2016(2):17-22
10. 耿超，张玉银，徐斌，吴健，韩海，“基于喷雾测试与仿真的均质直喷汽油机喷嘴选型匹配研究”，内燃机学报，（审查中）2016

[2015]
11. Shiyan Li, Yuyin Zhang, Bin Xu, Correlation analysis of superheated liquid jet breakup to bubble formation in a transparent slit nozzle, Experimental Thermal and Fluid Science, Vol. 68: 452–458, 2015.
12. Yuyin Zhang, Shiyan Li, Bin Zheng, Jian Wu, Bin Xu, Quantitative observation on breakup of superheated liquid jet using transparent slit nozzle, Experimental Thermal and Fluid Science, Vol. 63: 84–90, 2015.
13. 姜伟，张玉银，李世琰，张勇，张伟，基于一维/三维模型耦合的富氧燃烧天然气发动机数值模拟， 车用发动机，2015年第6期（总221期）：39-43, 2015
14. 耿超，张玉银，徐斌，吴健，韩海，“喷雾特性CFD仿真的准确性与效率的探讨”，内燃机工程， Vol. 36 (6)：130-136, 2015

[2014]
15. Yuyin Zhang*, Shiyan Li, Baiyang Lin, Yang Liu, Jian Wu, Bin Xu, A review on laser diagnostics on atomization and evaporation of liquid fuel. Proc. SPIE 9232 (923202) : 1-6, 2014 (doi:10.1117/12.2063882)
16. Shiyan Li, Yuyin Zhang*, Shenqi Wu, Bin Xu, Measurement of vapor/liquid distributions in a binary-component fuel spray using laser imaging of droplet scattering and vapor absorption. Proc. SPIE 9232 (92320A): 1-6, 2014 (doi:10.1117/12.2063645)
17. 王磊，吴晓东，张玉银，“全轮独立电驱动车辆的转向差速跟随控制”，控制工程，第21卷S0期， pp.78-86(2014)
18. 黄伟，张玉银，许敏，李铁，孔令逊，王家盛，“采用两次喷油策略降低直喷增压汽油机爆震和碳烟排放以及改善冷启动特性的研究”，内燃机工程，Vol. 35 (2) 48-53 (2014)
19. 周龙，张玉银，李冕，许敏，“基于多体动力学和遗传算法的发动机活塞型线优化设计”，内燃机工程， Vol. 35(5) 17-23（2014）
20. 李明，徐斌，许敏，张玉银“外开环直喷喷油器在不同燃油过热度下的喷雾特性研究”,内燃机工程，Vol. 35 (5) 88-94，（2014）

[2013]
21. Yuyin Zhang, Gaoming Zhang, Min Xu, Jianxin Wang, Droplet temperature measurement based on 2-color laser-induced exciplex fluorescence, Experiments in Fluids, Vol. 54, p.1583 (2013.7)
22. Huayang Zhu, Yuyin Zhang, Min Xu, Robert J. Kee, Droplet vaporization characteristics of multicomponent mixtures of methanol and gasoline surrogate in opposed stagnation flows, Proceedings of the Combustion Institute, Volume 34, Issue 1, pp.1545–1552, 2013.
23. Wei Zeng, Min Xu, Yuyin Zhang, Zhenkan Wang, Laser Sheet Dropsizing of Flash Evaporating Sprays using Simultaneous LIEF/MIE Techniques, Proceedings of the Combustion Institute, Volume 34, Issue 1, pp. 1677–1685, 2013.
24. Zhang Gaoming, Xu Min, Zhang Yuyin, Zhangming, Cleary David. Macroscopic characterization of flash-boiling multihole sprays using planar laser-induced exciplex fluorescence. Part II: Cross-sectional spray structure[J]. Atomization and Sprays, V23(3): 256-278, 2013.
25. Zhang Gaoming, Xumin, Zhang Yuyin, Hung David. Characteristics of flash boiling fuel sprays from three types of injector for spark ignition direct injection (SIDI) engines. Lecture Notes in Electrical Engineering, V189(VOL.1): 443-454, 2013.
26. Zhang Ming, Xumin, Zhang Yuyin, Zhang Gaoming, Cleary David. Flow-field investigation of multihole superheated sprays using high-speed Piv. Part II. Axial direction. Atomization and Sprays, V23(2): 119-140, 2013.
27. Xu Min, Zhang Yuyin, Zengwei, Zhang Gaoming, Zhangming. Flash Boiling: Easy and Better Way to Generate Ideal Sprays than the High Injection Pressure. SAE International Journal of Fuels and Lubricants, V6(1): 137-148, 2013.
28. Zhang Ming, Xu Min, Zhang Yuyin, Zhang Gaoming, Cleary David. Flow-field investigation of multi-hole superheated sprays using high-speed PIV. Part I. cross-sectional direction[J]. Atomization and Sprays, V22(11): 983-995, 2012.
29. Gaoming Zhang, Min Xu, Yuyin Zhang, Ming Zhang, David J. Cleary, “Macroscopic characterization of flash-boiling multi-hole sprays using planar laser induced exciplex fluorescence technique. Part I. On-axis spray structure”, Atomization and Sprays, Vol. 22, No.10, pp. 861–878, 2012.
30. 李明，张玉银，徐斌，罗丽，吴健，许敏,“采用外开环喷油器的直喷汽油机大负荷下燃油湿壁问题研究”,内燃机学报，第31卷第5期 , pp. 442-448 （2013）

[2012]
31. Huayang Zhu, Robert J. Kee, Longhua Chen, Jingjing Cao, Min Xu, Yuyin Zhang, “Vaporization characteristics of methanol, ethanol, and heptane droplets in opposed stagnation flow at low temperature and pressure”, Combustion Theory and Modelling, Vol.16, No.4, pp.715-735, 2012.
32. Wei Zeng, Min Xu, Gaoming Zhang, Yuyin Zhang, David J Cleary, "Atomization and Vaporization for Flash-boiling Multi-hole Sprays with Alcohol Fuels", Fuel, Vol.95, pp. 287-297, 2012
33. Wei Zeng, Min Xu, Ming Zhang, Yuyin Zhang, David J Cleary, "Macroscopic Characteristics for Direct-Injection Multi-hole Sprays Using Dimensionless Analysis", Experimental Thermal and Fluid Science, Vol.40, pp.81-92, 2012
34. 李相超，张玉银，许敏，张高明，王振侃，“直喷汽油机缸内喷雾湿壁问题研究”，内燃机工程，第33卷第5期 , pp. 17-23 （2012）
[2011]
35. 张玉银，张高明，许敏，“直喷汽油机燃烧系统开发中的喷雾激光诊断技术”，汽车安全与节能学报,第2 卷 第4 期，pp.294-307,(2011)
36. 高永兴，张玉银，许敏，苏建业，孔令逊，李铁，“基于LIVC和双VVT技术的增压直喷汽油机抑制爆震试验研究”，车用发动机，第1期(总第198期)，2012
37. 鄂亚佳，许敏，曾纬，张高明，张玉银, “基于平面激光Mie散射技术的乙醇喷雾特性研究”,内燃机工程，第32卷第2期，p. 63-67（2011）
38. 朱斌，许敏，张玉银，张高明，“乙醇汽油喷雾特性研究及低压直喷喷嘴优化”，车用发动机2011年第一期，p. 79-84

[2009]
39. J. Gao, S. Moon, Y-Y. Zhang, K. Nishida and Y. Matsumoto, "Flame structure of wall-impinging diesel fuel sprays injected by group-hole nozzles", Combustion and Flame, Vol. 156, No. 6, pp. 1263-1277 (2009).
40. S. Moon, J. Gao, K. Nishida, Y. Matsumoto, Y-Y. Zhang, “Ignition and Combustion Characteristics of Wall-Impinging Sprays Injected by Group-Hole Nozzles for Direct-Injection Diesel Engines”, SAE International Journal of Engines, Vol. 1, Issue 1, pp. 1205-1219 (2009.4).
41. Y-Y. Zhang, J. Wu, and S. Ishizuka, "Hydrogen addition effect on laminar burning velocity, flame temperature and flame stability of a planar and a curved CH4-H2-air premixed flame", International Journal of Hydrogen Energy, Vol. 34, No.1, pp. 519-527 (2009).
42. Y-Y. Zhang, S. Ishizuka, H. Zhu, and R. J. Kee, "Effects of stretch and pressure on the characteristics of premixed swirling tubular methane-air flames", Proc. of the Combustion Institute, Vol.32, No.1, pp.1149-1156 (2009).

[~2008]
43. K. Nishida, , J. Gao, T. Manabe, Y-Y. Zhang, "Spray and mixture properties of evaporating fuel spray injected by hole-type direct injection diesel injector", Int. J. Engine Research, Vol.9, No. 4, pp. 347-360 (2008).
44. Robert J. Kee, Andrew M. Colclasure, Huayang Zhu, and Yuyin Zhang, "Modeling Tangential Injection into Ideal Tubular Flames", Combustion and Flame, Vol.152, pp.114-124, (2008).
45. T. Li, K. Nishida, Y-Y. Zhang, H. Hiroyasu, "Effect of split injection on stratified charge formation of direct injection spark ignition engines", International Journal of Engine Research, Vol.8, No. 2, pp.205-219 (2007).
46. Y-Y. Zhang and K. Nishida, "Vapor distribution measurement of higher and lower volatile components in an evaporating fuel spray via laser absorption scattering (LAS) technique", Combustion Science and Technology, Vol.179, No. 5, pp.863-881, (2007).
47. Y-Y. Zhang, S. Ishizuka, H. Zhu, and R. J. Kee, "The Effects of Rotation Rate on the Characteristics of Premixed Propane/Air Swirling Tubular Flames", Proc. of the Combustion Institute, Vol. 31, pp.1101-1107, (2007).
48. Y-Y. Zhang, K. Nishida, S. Nomura, and T. Ito, "Spray Characteristics of a Group-hole Nozzle for D.I. Diesel Engines", Atomization and Spray, Vol. 16, No.1, pp. 35-49, (2006).
49. Y-Y. Zhang, D. Shimokuri, Y. Mukae, and S. Ishizuka, "Flow Field in Swirl-Type Tubular Flame Burner", JSME International Journal, Series B: Fluids and Thermal Engineering, Vol. 48, No.4, pp. 830-838, (2005).
50. T. Li, K. Nishida, Y-Y. Zhang, T. Onoe, and H. Hiroyasu, "Enhancement of Stratified Charge for DISI Engines through Split Injection (Effect and Its Mechanism)", JSME International Journal, Series B: Fluids and Thermal Engineering, Vol. 48, No.4, pp. 687-694, (2005).
51. Y-Y. Zhang and K. Nishida, "Imaging of Vapor/Liquid Distributions of Split-Injected Diesel Sprays in a 2-D Model Combustion Chamber", Combustion Science and Technology, Vol. 176, pp. 1465-1491, (2004).
52. Y-Y. Zhang and K. Nishida, "Effect of Injection Temporal-Splitting on Characteristics of Fuel-Air Mixture Formation in a Common Rail Diesel Spray", Proceedings of the I MECH E, Part D Journal of Automobile Engineering, Vol. 218, No. 3, pp. 323-331, (2004).
53. T. Li, H. Hiroyasu, Y-Y. Zhang and K. Nishida, "Characterization of Mixture Formation Processes in DI Gasoline Engine Sprays with Split Injection Strategy via Laser Absorption and Scattering (LAS) Technique", SAE Transactions, Journal of Fuel and Lubricants, Vol. 112, pp. 2296-2306, Paper No. 2003-01-3161, (2003).
54. T. Li, M. Yamakawa, D. Takaki, K. Nishida, Y-Y. Zhang and H. Hiroyasu, "Characterization of Mixture Formation Processes in DI Gasoline Engine Sprays by Laser Absorption Scattering (LAS) Technique – Effect of Injection Conditions", SAE Transactions, Journal of Fuel and Lubricants, Vol. 112, pp. 1115-1124, Paper No. 2003-01-1811, (2003).
55. Y-Y. Zhang, K. Nishida, "Vapor/liquid Behaviors in Split-Injection D.I. Diesel Sprays in a 2-D Model Combustion Chamber", SAE Transactions, Journal of Fuel and Lubricants, Vol. 112, pp. 1276-1287, No. 2003-01-1837, (2003).
56. Y-Y. Zhang, T. Ito, T. Yoshizaki and K. Nishida, "Characterization of Droplets and Vapor Concentration Distributions in Split-Injection Diesel Sprays by Processing UV and Visible Images", JSME International Journal, Series B: Fluids and Thermal Engineering, Vol. 46, No.1, pp. 100-108, (2003).
57. M. Yamakawa, D. Takaki, T. Li, Y-Y. Zhang, and K. Nishida "Quantitative Measurement of Liquid and Vapor Phase Concentration Distributions in a D.I. Gasoline Spray by the Laser Absorption Scattering (LAS) Technique", SAE Transactions, Journal of Engines, Vol. 111, pp.2194-2206, Paper No.2002-01-1644, (2002).
58. 山川正尚，高木大介，西田恵哉，張玉銀，「ガソリン噴霧内混合気濃度分布計測のための二波長レーザ吸収散乱（LAS）法（計測原理，試料燃料の選定と蒸発噴霧画像の撮影），微粒化，Vol.11, No. 35, pp. 142-150, (2002).
59. Y-Y. Zhang, T. Ito and K. Nishida, "Characterization of Mixture Formation in Split-Injection Diesel Sprays via Laser Absorption-Scattering Technique", SAE Transactions, Journal of Engines, Vol. 110, pp. 2189-2200, Paper No.2001-01-3498, (2001).
60. 張玉銀，伊藤友昭，西田恵哉，吉崎拓男， 「紫外・可視光吸収散乱画像の解析による燃料噴霧内の液相および蒸気相濃度分布の定量的計測」, 自動車技術会論文集, Vol. 32, No. 3, pp. 37-42, (2001).
61. Y-Y. Zhang, T. Yoshizaki and K. Nishida, "Imaging of Droplets and Vapor Distributions in a Diesel Fuel Spray by Means of a Laser Absorption-Scattering Technique", Applied Optics, Vol. 39, No. 33, pp. 6221-6229, (2000).
62. L. Zhou, Y-Y. Zhang, Z. Han, D. Jiang, "An Investigation on Ignition & Combustion Characteristics of IDI & DI Diesel Engines Operating on Neat Alcohol Fuels", ASME ICE-Vol. 24, pp.17-23, (1994).
63. L. Zhou, S. Song, Z. Han, B. Xu, Y-Y. Zhang and J. Du, "Evaluation and Study on the Heat Release Rate of Swirl Chamber Diesel Engine", SAE Paper No.911786, (1991).
64. L. Zhou, Y-Y. Zhang and Z. Han, "An Experimental Study on the Working Stability and Combustion Characteristics of a Direct Injection Diesel Engine Operating on Multi-fuels", SAE Transactions, Journal of Fuel and Lubricants, Vol. 99, pp. 503-512, (1990).
65. X. Wu, Y. Wang, and Y-Y. Zhang, "Diagnosis of Partial Burning and Study of Spark Plug Soot for SI Engine", Journal of Internal Combustion Engine Engineering, Vol. 24, No. 5, (2003).
66. Y-Y. Zhang, D. Wu, Z. Yang and C. Liu, "A Study on Early Flame Propagation and Combustion Control of a SI Engine Using Optical Sensors Embedded in Spark-Plug", Journal of Combustion Science and Technology, Vol.6, No.4, pp.368-372, (2000).
67. C. Liu, L., Fu, Y-Y. Zhang, S. Chen and K. Pan, "The Variable Argument Module Design Method for Internal Combustion Engine CAD System", Journal of Military Engineering, Vol. 2, pp. 18-25, (1996).
68. Y-Y. Zhang and U. Spicher, "A Simulating Study of Automotive Fuel Consumption and Exhaust Emissions under a Drive-Cycle", Vehicle Engine, Vol.19, No.2, pp. 14-20, 1996.
69. S. Chen, K. Pan and Y-Y. Zhang, "Simulation of Fuel Injection System for Diesel Engine and Analyses of its Computation Results", Journal of Xi'an Jiaotong University, Vol. 29, No. 11, pp.104-110, (1995).
70. L. Wang, Y-Y. Zhang, J. Shi, "A Circularly-stratified Combustion System for Minimizing Petrol Engine Emissions", Journal of Internal Combustion Engine Engineering, Vol. 16, No. 2, (1995).
71. C. Fan, H. Zhao, Y-Y. Zhang, Z. Yang, L. Zhou, "An Experimental Study on Direct-Injection Circularly Stratified-Charge System of Gasoline Engine", Journal of Xi'an Jiaotong University, Vol. 28, No. 6, pp.113-119, (1994).
72. K. Pan, S. Chen, Y. Yang, Y-Y. Zhang and C. Liu, "Development and Research of a CAD System for Diesel Engine Fuel Injection System", Journal of Computer Applications in IC Engine, Vol. 1, No. 2, pp. 98-103, (1994).
73. L. Wang, L. Zhou, Y-Y. Zhang, J. Shi and S. Song, "A Study on Reduction of NOx Emission of Gasoline Engine by EGR and its Microcomputer Control System", Journal of Internal Combustion Engine Engineering, Vol. 14, No.4, pp.24-31, (1993).
74. Y-Y. Zhang, L. Zhou, Z. Yang and Z. Han, "Working Stability and Combustion Characteristics of a D.I. Diesel Engine Performances Operating on Multi-fuels", Journal of Internal Combustion Engine Engineering, Vol. 12, No.1, pp.45-50, (1991).
75. Y-Y. Zhang, "Researches on I.C. Engines in Karlsruhe University in Germany", Journal of Foreign Internal Combustion Engine (Chinese), Vol.5 No. 31, pp.57-59, (1999).
76. 張玉銀，下栗大右，向喜央，石塚悟，「PIVによる旋回型管状火炎バーナ内の流速測定」，広島大学大学院工学研究科研究報告，Vol.54，No.1，pp.1-7, (2005).

2012.2～present Advanced Techniques in Measurement, Shanghai Jiao Tong University
2011.2～2013.1 Automobile energy saving and clean energy (seminars for freshmen)
2006.4～2009.3 Heat engine, Tokyo Denki University
2006.4～2009.3 Introduction of mechanical engineering, Tokyo Denki University
2006.4～2009.3 Engineering thermodynamics and its practice, Tokyo Denki University
2006.4～2009.3 Experiment of internal combustion engine, Tokyo Denki University
2001.4～2006.3 Experiment one: Flame of gaseous fuel, Hiroshima University
2001.4～2006.3 Experiment two: Combustion characteristics of a spark ignition engine

[1].A multi-functional constant volume bomb for measurements of spray, combustion and soot formation, patent no.: CN201310717167.5
[2].A optically accessible window of high temperature and high pressure constant volume chamber for visualization, patent no.: CN201310717138.9
[3].A method and system for cold-start of fuel direct injection engine, patent no.: CN201010605628.6
[4].A nozzle for direct inject engine, patent no.: CN201010300424.1
[5].A modular cylinder head for two-cylinder boxer engine, patent no.: CN200910311673.8
[6].A circularly stratified combustion system for internal combustion engine operating on multi-fuels, patent no.: CN03134228.0

2015- Board of Combustion Branch, Chinese Society of Engineering Thermodynamics
2014- Multiphase Flow Committee, Chinese Society for Measurement
2013- Editorial Board, "Experiments in Fluid Mechanics"
2013- Board of North American Chinese Association of Automotive Engineers
2013- Board of North American Chinese Association of Internal Combustion Engine
2013 Advisory Committee, International Conference on Optical Particle Characterization
2011-2012 Local Organizer of International Forum of Automotive Engine Researchers in Asia
2007-2009 Vice president of the Chinese Association of Automotive Engineers in Japan

2016 Excellent Paper Award, Chinese Society of Engineering Thermodynamics
2013 Outstanding Teacher Award, Shanghai Jiaotong University, China
2012 Prize for supervising Bachelor excellent thesis (TOP1%), Shanghai Jiaotong University (Tianyun LI), China
2010 Award of Shanghai Pujiang Program, China
2002 SAE International “Excellent Presentation Award”, USA
1992 “Progressive Science and Technology Award”, by China State Education Committee, China
1991 “Teaching Excellence Award”, by Xi'an Jiaotong University, China
1991 “Scientific Research Achievement Award”, by Xi'an Jiaotong University, China