当前位置:首页 > 师资队伍 > 教师名录
来新民    
教授    
    
办公电话    
021-34206303
通讯地址    
上海交大机械与动力工程学院机械楼A606室
电子邮件    
个人主页    
教育背景
时间
毕业院校
学历
1994-1997
天津大学机械制造专业
博士
1987-1990
河北工学院机械学专业
硕士
1980-1984
河北工学院机械制造工艺及设备
学士
工作经历
1984-1987: 河北工学院机械工程学院,助教
1990-1994: 河北工学院机械工程学院,讲师
1997-1999: 上海交通大学机械与动力工程学院,博士后
2000-2001: 上海交通大学机械与动力工程学院,副教授
2001.4-2001.8: 密西根大学吴贤铭制造中心,访问学者
2001-至今:上海交通大学机械与动力工程学院,教授
出访及挂职经历
研究方向
薄板产品装配
微细制造与新能源装备制造
汽车车身数字化制造
科研项目
2014-2018  973项目“新一代超大型运载火箭薄壁结构制造的科学问题”,首席科学家
2013-2017  国家自然科学基金重点项目“薄膜表面微细结构直接热辊连续成形的介观尺度效应及控形控性新方法”,负责人
2009-2012  国家自然科学基金重大国际(地区)合作项目 “质子交换膜燃料电池极板制造与电堆装配的理论与技术基础”,负责人
2006-2008  国家自然科学基金 “介观尺度微铣削过程仿真建模与表面形貌预测”,负责人
2006-2009  国家863计划,“基于冲压成形的质子交换膜电堆金属双极板制造技术”,第二负责人
2009-2010  上汽集团研发项目,“质子交换膜燃料电池用双极板制造技术研究”,负责人
2005-2007  上海市科委基础研究重点项目,“复杂制造过程的多维仿真理论与方法研究”,负责人
2004-2006  国家自然科学基金,“基于多属性有向图与矩阵映射的薄板产品装配构形设计的数字化建模”,负责人
2008-2010??project of GM-SJTU Collaborative Research Laboratory in Advanced Manufacturing Processes Joint performance & quality for lightweight and dissimilar materials?±??Co-PI
2002-2005  美国通用汽车公司R&D合作项目,“Research on adaptive strategy in auto-body Assembly Process design”,负责人
2008-2010  美国福特汽车公司URP项目,“Process Robustness & Quality Control for Low Cost Manufacturing”,负责人
代表性论文专著
[1]Xu ZT, Peng LF, Fu MW, Lai XM*. Size effect affected formability of sheet metals in micro/meso scale plastic deformation: Experiment and modeling. International Journal of Plasticity, 2015, 68: 34-54.
[2]Mao MY, Peng LF, Yi PY and Lai XM* 2015 Modeling of the Friction Behavior in Metal Forming Process Considering Material Hardening and Junction Growth ASME-Journal of Tribology 138 012202
[3]Yi PY, Shu YY, Deng YJ, Peng LF, Lai XM*. Mechanism of forming defects in roll-to-roll hot embossing of micro-pyramid arrays I: experiments. IOP-Journal of Micromechanics and Microengineering, 2015, 25(10): 105017.
[4]Wang J, Yi PY, Deng YJ, Peng LF, Lai XM*, Ni J. Mechanism of forming defects in roll-to-roll hot embossing of micro-pyramid arrays: II. Numerical study. IOP-Journal of Micromechanics and Microengineering, 2015, 25(11): 115030.
[5]Deng YJ, Yi PY, Peng LF, Lai XM*, Lin ZQ 2015 Flow behavior of polymers during the roll-to-roll hot embossing process IOP-Journal of Micromechanics and Microengineering. 25 065004.
[6]Zhang CP, Yi PY, Peng LF, Lai XM*, Ni J. Fabrication of Moth-eye Nanostructure Arrays using roll-to-roll UV-Nanoimprint Lithography with an Anodic Aluminum Oxide mold. IEEE-Nanotechnology, 2015,14(6):1127-1137.
[7]Yi PY, Wu H, Zhang CP, Peng LF, Lai XM*. Roll-to-roll UV imprinting lithography for micro/nanostructures. AIP-Journal of Vacuum Science & Technology B, 2015, 33(6): 060801.
[8]Qiu DK, Yi PY, Peng LF, Lai XM. Channel Dimensional Error Effect of Stamped Bipolar Plates on the Characteristics of Gas Diffusion Layer Contact Pressure for Proton Exchange Membrane Fuel Cell Stacks. ASME-Journal of Fuel Cell Science and Technology, 2015, 12(4): 041002.
[9]Gao ZY, Peng LF, Yi PY, Lai XM. Grain and geometry size effects on plastic deformation in roll-to-plate micro/meso-imprinting process. Journal of Materials Processing Technology, 2015, 219: 28-41.
[10]Peng LF, Deng YJ, Yi PY and Lai XM* 2014 Micro hot embossing of thermoplastic polymers: a review J. Micromech. Microeng. 24 013001.
[11]Peng LF, Lai XM*, Yi PY and Mai JM 2011 Design, Optimization, and Fabrication of Slotted-Interdigitated Thin Metallic Bipolar Plates for PEM Fuel Cells Journal of Fuel Cell Science and Technology-Transactions of the ASME 8 011002.
[12]Lai XM*, Tian ZQ, Lin ZQ , A Simplified Method for Optimal Sensor Distribution for Process Fault Diagnosis in Multistation Assembly Processes, Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol.130, No.5, 051002-1~13, 2008
[13]Cao J, Lai XM*, Wayne Cai, Jin S, Lin ZQ, Workpiece positioning analyses: The exact solutions and a quadratic variation approximation using the method of moments, Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol.130, No.6, 061013-1~10
[14]Peng LF, Liu DA, Hu P, Lai XM*, Ni J, Fabrication of metallic bipolar plates for proton exchange membrane fuel cell by flexible forming process-numerical simulations and experiments, Journal of Fuel Cell Science and Technology, Transactions of the ASME, Vol.7, No.3, 031009-1~9,2010
[15]Lai XM*, Li HT, Li CF, Lin Zhongqin, Ni Jun, Modeling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness, International Journal of Machine Tools and Manufacture, Vol.48, No.1, 1-14, 2008
[16]Lai XM*, Zhang XY, Zhang YS, Chen Guanlong, Weld quality inspection based on online measured indentation from servo encoder in resistance spot welding, IEEE Transactions on Instrument and Measurement, Vol.56, No.4, 1501-1505, 2007
[17]Lai XM*, Liu DA, Peng LF, Ni Jun, A mechanical-electrical finite element method model for predicting contact resistance between bipolar plate and gas diffusion layer in PEM fuel cells, Journal of Power Sources, Vol.182, No.1, 153-159,2008
[18]Lai XM*, Peng LF, Hu P, Lan Shuhuai, Ni Jun, Material behavior modelling in micro/meso scale forming process with considering size/scale effects, Computational Materials Science, Vol.43, No.4, 1003-1009, 2008
[19]Liu DA, Peng LF, Lai XM*, Effect of dimensional error of metallic bipolar plate on the GDL pressure distribution in the PEM fuel cell, International Journal of Hydrogen Energy, Vol.34, No.2, 990-997,2009
[20]Hu P, Peng LF, Zhang WG, Lai XM*, Optimization design of slotted-interdigitated channel for stamped thin metal bipolar plate in PEMFC, Journal of Power Sources, Vol.187, 407-414,2009
[21]Peng LF, Hu P, Lai XM*, Mei DQ, Ni J, Investigation of micro/meso sheet soft punch stamping process - simulation and experiments, Materials and Design, Vol.30, no.3, pp.783-790, 2009
[22]Peng LF, Lai XM*, Liu DA, Hu P, Ni J, Flow channel shape optimum design for hydroformed metal bipolar plate in PEM fuel cell, Journal of Power Sources, Vol.178, No.1, 223-230, 2008
[23]Li HT, Lai XM*, Li CF, Feng J, Ni J, Modelling and experimental analysis of the effects of tool wear, minimum chip thickness and micro tool geometry on the surface roughness in micro-end-milling, Journal of Micromechanics and Microengineering, Vol.18, No.2, 025006-1~12, 2008
[24]Liu DA, Lai XM*, Ni J, Peng LF, Lan SH, Lin ZQ, Robust design of assembly parameters on membrane electrode assembly pressure distribution, Journal of Power Sources, Vol.172, No.2, 760-767, 2007
[25]Li CF, Lai XM, Li HT, Ni J., Modeling of three-dimensional cutting forces in micro-end-milling, Journal of Micromechanics and Microengineering, Vol.17, No.4, 671-678, 2007
[26]Peng LF, Liu F, Ni J, Lai XM, Size effects in thin sheet metal forming and its elastic-plastic constitutive model, Materials & Design, Vol.28, No.5, 1731-1636, 2007
[27]Zhu WF, Wang H, Lai XM, Lin ZQ, Chen Y, A new method for fitting car doors allowing for the thermal effects of welding, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol.220, No.7, 891-900,2006
[28]Chen GL, Zhou JQ, Cai Wayne, Lai XM, Lin ZQ, Menassa R, A framework for an automotive body assembly process design system, CAD Computer Aided Design, Vol.38, No.5, 531-539,2006
[29]Peng LF, Lai XM, Li, MZ, Transition surface design for blank holder in multi-point forming, International Journal of Machine Tools and Manufacture, Vol.46, No.12-13, 1336-1342, 2006
[30]Wang WR, Chen GL, Lin ZQ, Lai XM, Automated hierarchical assembly system construction in automobile body assembly planning, Journal of Mechanical Design, Transactions of the ASME, Vol.127, No.2, 347-351,2005
教学工作
1、课程名称:汽车制造工艺   
   授课对象:本科生  
   学时数:36    
   学分:2
2、车身制造工艺和质量控制   
   授课对象:硕士 
   学时数:36    
   学分:2
软件版权登记及专利
1.专利
[1]用于质子交换膜燃料电池的组合式整体双极板,ZL 200610029402.X
[2]基于辊压成形的质子交换膜燃料电池金属双极板制造方法,ZL 200610118899.2
[3]质子交换膜燃料电池电堆的制造方法,ZL 200710043435.4
[4]基于薄板冲压成形的质子交换膜燃料电池双极板,ZL 200710044479.9
[5]金属薄板成形的质子交换膜燃料电池双极板,ZL 200710172148.3
[6]质子交换膜燃料电池双极板多道蛇行流场结构,ZL 200910045410.7
[7]质子交换膜燃料电池双极板与膜电极组件复合制造方法,ZL 200910049005.2
[8]直接电阻局部加热的金属表面压印成形装置,ZL 201010136555.0
[9]电流辅助的燃料电池超薄金属双极板压焊装置及其方法,ZL 201010525736.2
[10]用于燃料电池的金属气体扩散层及其制备方法,ZL 201010605127.8
[11]燃料电池电堆的自动化装配装置,ZL 201110065618.2
[12]一种燃料电池双极板的激光胶焊方法,ZL 201210034944.1
[13]一种全液压驱动辊型微细压印装置,ZL 201210049165.9
[14]燃料电池超薄金属双极板自适应激光焊接夹具,ZL 201210195617.4
[15]聚合物薄膜类产品微细结构卷对卷热辊压成形装置,ZL 201210208492.4
[16]一种燃料电池金属双极板碳铬阶梯镀层及其制备方法,ZL 201210289381.0
[17]带有导电耐腐蚀镀层的燃料电池金属双极板及其制备方法,ZL 201210438569.7
[18]基于卷对卷热辊压聚合物薄膜表面微结构加工装置及方法 ,ZL 201210292620.8
[19]一种车用燃料电池的大面积金属双极板,ZL 201210509907.1
[20]一种燃料电池大面积金属双极板连续冲压成形模具,ZL 201310051905.7

2.软件
薄板产品装配偏差分析系统(简称AVA)V1.0
学术兼职
(1)2006-至今 中国汽车工程学会车身技术分委会委员   
(2)2005-至今 中国工程机械学会理事
(3)2003-2008 中国工程图学学会应用图学专业委员会委员     
荣誉奖励
2015  教育部自然奖一等奖(排1)
2014  上海市优秀学术带头人
2015  国家科技进步奖二等奖(排4)
2009  “长江学者”奖励计划特聘教授
2008  通用汽车中国高校汽车领域创新人才
2004  教育部新世纪人才计划
2002  上海市曙光学者计划
2002  国家科技进步奖二等奖(排5)
已上传文件
Email:sjtume@sjtu.edu.cn
地址:上海市东川路800号闵行机械群楼 邮编:200240
Copyright © 2012-2013.
上海交通大学机械与动力学院    版权所有