当前位置:首页 > 师资队伍 > 教师名录
李大永    
教授    
    
办公电话    
021-34206313
通讯地址    
机械与动力学院705
电子邮件    
个人主页    
教育背景
时间
毕业院校
学历
1997-2000
吉林工业大学
博士
1994-1997
吉林工业大学
硕士
1990-1994
吉林工业大学
学士
工作经历
2009-      上海交通大学机械与动力工程学院  教授
2002-2008  上海交通大学机械与动力工程学院  副教授
2000-2002  上海交通大学塑性成形工程系   博士后
出访及挂职经历
2007  访问密西根大学、美国福特汽车公司研究与创新中心
2008  访问美国福特汽车公司研究与创新中心
2010  参加NUMIFORM2010国际会议
2011  参加ICTP2011国际会议、访问美国福特汽车公司研究与创新中心
2012  访问美国福特汽车公司研究与创新中心
2014  参加NUMISHEET2014国际会议
2015  访问美国俄亥俄州立大学
研究方向
机械设计与成形制造中的CAD/CAE技术
大变形弹塑性有限元方法
塑性成形理论及其模拟技术
科研项目
1)2005-2007,国家自然科学基金项目“镁合金板材大变形成形机制与过程模拟研究”,负责人。
2)2007-2010,国家自然基金重点项目,“材料智能化近终成形加工技术的若干基础问题”,主要参加人。
3)2006-2008,国家973计划前期研究项目“材料制备新方法探索及性能研究”,主要参加人。
4)2002-2005,国家863计划重点项目“高强高韧镁合金及其应用技术研究”,主要参加人。
5)2008-2009,上海市创新科技支撑计划项目子课题 “薄带连铸带钢力学性能及表面裂纹形成机理研究”,负责人。
6)2008-2010,教育部新世纪优秀人才计划项目 “镁合金板材变形机理与成形性能的宏微观研究”,负责人。
7)2009-2011,上海市重点基础研究项目 “ERW焊管排辊成形理论与工艺设计方法研究”,负责人。
8)2006-2008,上海市科教兴市重大产业科技攻关子课题 “先进高强钢动态力学行为及其使用特性研究”,负责人。
9)2005-2006,上海市科委国际合作项目 “基于辊弯成形全流程动态模拟的辊形与工艺优化技术研究”,负责人。
10)2006-2008,上海市启明星计划项目“辊弯成形动态模拟与智能优化关键技术研究”,负责人。
11)2003-2006,上海市重点基础研究项目,“镁合金板材变形机理及温热冲压成形性能研究”,主要参加人。
12)2012-2013,宝钢公司委托项目“UOE钢管成型有限元仿真系统开发”,负责人。
13)2009-2011,美国福特汽车公司University Research Project (URP)项目“Integrated Computational Materials Engineering (ICME) Methodology  Development for Alloy Design & Defects Control for Al & Mg Forming-Stage II”, 负责人。
14)2006-2013,日本大金空调公司委托项目“Research on Plastic Forming of Heat Exchangers”,负责人。
15)2012-2015,国家自然科学基金“基于多晶体塑性本构模型的镁合金板材成形极限研究,负责人。
16)2013-2015,美国福特汽车公司University Research Project (URP)项目“Life Assessment of Spot Welds based on Crack Propagation”, 负责人。
17) 2017-2020, 国家自然科学基金“镁合金多晶体塑性-动态再结晶自洽集成计算模型”,负责人。
代表性论文专著
1. Guowei Zhou, Zihan Li, Dayong Li* Yinghong Peng, Hatem S. Zurob, Peidong Wu. A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper. International Journal of Plasticity, 2017, doi: 10.1016/j.ijplas.2017.01.001.
2. D.Y. Li, Z. Chen, L. Sun, J.W. Lee, R.H. Wagoner. An improved test for shear fracture. International Journal of Solids and Structures, 2016, 97-98: 29-42.
3. X.H. Fan, D. Tang, W.L. Fang, D.Y. Li, Y.H. Peng. Microstructure development and texture evolution of aluminum multi-port extrusion tube during the porthole die extrusion. Materials Characterization, 2016, 118: 468-480
4. Zhong Chen, Hyuk Jong Bong, Dayong Li, R.H. Wagoner. The elastic-plastic transition of metals. International Journal of Plasticity, 2016, 83: 178-201.
5. Tianxia Zou, Dayong Li*, GuanghanWu, Yinghong Peng. Yield strength development from high strength steel plate to UOE pipe, Materials and Design, 2016, 89: 1107–1122.
6. Guowei Zhou, Mukesh K. Jain, Peidong Wu, Yichuan Shao, Dayong Li*, Yinghong Peng, Experiment and crystal plasticity analysis on plastic deformation of AZ31B mg alloy sheet under intermediate temperatures: how deformation mechanisms evolve, International Journal of Plasticity, 2016, 79: 19-47.
7. Yichuan Shao, Tao Tang, Dayong Li*, Guowei Zhou, Shaorui Zhang, Yinghong Peng. Polycrystal modeling of hot extrusion texture of AZ80 magnesium alloy Transactions of Nonferrous Metals Society of China, 2016, 26(4): 1063–1072.
8. Yichuan Shao, Tao Tang, Dayong Li*, Weiqin Tang and Yinghong Peng. Crystal plasticity finite element modelling of the extrusion texture of a magnesium alloy,Modelling and Simulation in Materials Science and Engineering, 2015,23: 055011 (19pp)
9. Tianxia Zou, GuanghanWu, DayongLi*, QiangRen ,JiyuanXin, YinghongPeng. A numerical method for predicting O-forming gap in UOE pipe manufacturing, International Journal of Mechanical Sciences, 2015,98:39–58.
10. Guowei Zhou, K. Ananthaeswara, G. Mitukiewicz, Dayong Li, R.K. Mishra, M.K. Jain, FE simulations of gas blow forming and prediction of forming limit diagram of AZ31 magnesium sheet, Journal of Materials Processing Technology, 2015, 218: 12–22.
11. Ren Qiang, Zou Tianxia, Li Dayong*, Tang Ding, Peng Yinghong. Numerical study on the X80 UOE pipe forming process, Journal of Materials Processing Technology, 2015, 215(1): 264-277.
12. X. H. Fan, M. Li, D. Y. Li, Y. C. Shao, S. R. Zhang, Y. H. Peng. Dynamic recrystallisation and dynamic precipitation in AA6061 aluminium alloy during hot deformation, Materials Science and Technology, 2014, 30(11): 1263 -1272.
13. Weiqin Tang, Dayong Li*, Shiyao Huang, Shaorui Zhang, Yinghong Peng. Simulation of texture evolution in magnesium alloy: Comparisons of different polycrystal plasticity modeling approaches. Computers & Structures, 2014, 143(9): 1-8.
14. Ding Tang, Qingqing Zhang, Dayong Li, Yinghong Peng. A physical simulation of longitudinal seam welding in micro channel tube extrusion. Journal of Materials Processing Technology, 2014, 214(11): 2777-2783.
15. Y. Shi, P. D. Wu, D. J. Lloyd and D. Y. Li . Effect of Rate Sensitivity on Necking Behavior of a Laminated Tube Under Dynamic Loading. Journal of Applied Mechanics ((Transactions of the ASME). 2013, 81(5): 05010.
16. L. M. Li, D. Y. Li*, Y. H. Peng, The simulation of sheet metal forming processes via integrating solid-shell element with explicit finite element method, Engineering with Computers. 2011, 27(3): 273-284.
17. LI L M., PENG Y. H., LI D. Y.*, A stabilized underintegrated enhanced assumed strain solid-shell element for geometrically nonlinear plate/shell analysis, Finite Elements in Analysis and Design, 2011, 47: 511-518.
18. Weiqin Tang, Shaorui Zhang, Yinghong Peng, Dayong Li , Influence of Extrusion parameters on grain size and texture distribution, Journal of Materials Processing Technology, 2011, 211: 1203–1209.
19. Ding Tang, Yinghong Peng, Dayong Li. Mechanical expansion of thick-walled micro-groove tube for high pressure ACR system. Journal of Pressure Vessel Technology (Transactions of the ASME). 2011, 132(2): 1202-1209.
20. Ding Tang, Dayong Li, Yinghong Peng, Zhaohui Du. Optimisation to the tube-fin contact status of the tube expansion process. Journal of Materials Processing Technology. 2011, 211(4): 573-577.
21. Xiaohui FAN, Weiqin TANG,Shaorui ZHANG, Dayong LI, Yinghong PENG, Effects of dynamic recrystallization in extruded and compressed AZ31 magnesium alloy, Acta Metallurgica Sinica(English letters), 2010, 23(5) : 334-342.
22. Shaorui Zhang, Yinghong Peng, Weiqin Tang,Dayong Li, The polycrystalline plasticity due to slip and twinning, Acta Mech., 2010, 212:293–303.
23. Li Juan Hu, Ying Hong Peng, Da Yong Li, and Shao Rui Zhang, Influence of Dynamic Recrystallization on Tensile, Materials and Manufacturing Processes, 2010, 25: 880–887.
24. Ding Tang, Dayong Li, Yinghong Peng, Zhaohui Du, A new approach in evaluation of thermal contact conductance of tube-fin, Applied Thermal Engineering, 2010, 30: 1991-1996.
25. Qingqing Zhang, Ding Tang, Dayong Li, Yinghong Peng, Numerical and experimental study on in-plane bending of microchannel, Journal of Materials Processing Technology, 2010, 210: 1876–1884.
26. Ding Tang, Yinhong Peng, Dayong Li. Numerical and experimental study on expansion forming of inner grooved tube. Journal of Materials Processing Technology. 2009, 209: 4668-4674.
27. Jinmao Jiang, Dayong Li, Yinhong Peng, JianXin Li. Research on strip deformation in the cage roll forming process of ERW round pipes. Journal of Materials Processing Technology. 2009, 209: 4850-4856.
28. Ding Tang, Yinhong Peng, Dayong Li*. Experimental and numerical study on expansion of thick-walled micro-groove tube. Journal of Mechanical Engineering Science. 2009, 223: 689-696.
29. Ding Tang, Dayong Li*, Yinhong Peng. Roles of surface booster system on bending of thin-walled copper tube. Journal of Materials Engineering and Performance. 2009, 18: 369–377.
30. Weiqin Tang, Shaorui Zhang, Yinghong Peng, Dayong Li*, Simulation of magnesium alloy AZ31 sheet during cylindrical cup drawing with rate independent crystal plasticity finite element method, Computational Material Sciences, 2009, 46: 393-399.
31. Dayong Li, Yinghong Peng, Shaorui Zhang, Numerical simulation of sheet metal stamping by using ODF data, International Journal of Mechanical Sciences. 2009, 59(1): 41-51.
32. Yinghong Peng, Jinmao Jiang, Dayong Li*, Jianzeng Han, Jianxin Li. Simulation of cage roll forming process of ERW pipes. International Journal of Materials and Product Technology, 2008, 32(4): 388-405.
33. Yinghong Peng, Ding Tang and Dayong Li*, Study on the influence of mandrel type on copper tube rotary draw bending. International Journal of Materials and Product Technology, 2008, 32(4): 406-422.
34. Dayong Li, Yingbing Luo, Yinghong Peng. The Numerical and Analytical Study on Stretch Flanging of V-Shaped Sheet Metal, Journal of Materials Processing Technology, 2007, 189:262-267.
35. Dayong Li, Yinghong Peng, Jilong Yin, Optimization of metal forming process via a hybrid intelligent optimization technique, Structural and Multidisciplinary Optimization, 2007, 34: 229-241.
36. QunFeng Chang, Dayong Li, Yinghong Peng, Xiaoqin Zeng. Experimental and numerical study of warm drawing of AZ31 magnesium alloy sheet. International Journal of Machine Tools & Manufacture. 2007, 47: 436–443.
37. Luo Yingbing, Li Dayong, Peng Yinghong, Formability and cavitation behavior of superplastic AA5083 aluminum alloy under biaxial tension, Transaction of Nonferrous Metal Society of China, 2006, 16: 1630-1633.

教学工作
1、课程名称:现代CAE技术及应用   
授课对象:硕士生
学时数: 36
学分:2

2.课程名称:工程材料
授课对象:本科生
学时数:51
学分:3

3.课程名称:机械优化方法
授课对象:本科生
学时数:51
学分:3

软件版权登记及专利
1、专利名称:基于数值仿真与决策树算法的塑性成形工艺规则获取方法
授权号:ZL200510024029.4 
2、专利名称:镁合金板材变压边力差温拉延方法
授权号:ZL200610117575.7 
3、专利名称:冷弯型钢成形过程中截面轮廓形状的测量方法
授权号:ZL200710046466.5 
4、专利名称:横向加载下换热器波纹翅片垂向强度的测量装置
授权号:ZL200710042300.6
5、专利名称:镁合金板材差温拉延模具
授权号:ZL 200610117578.0
6、专利名称:直缝焊管排辊成形机组全流程自动化参数建模方法
授权号:ZL 200710170759.4

7、软件名称:   钢管成型计算模型的自动化参数生成系统  
登记号:2007SR08095
8、软件名称:   塑性成形仿真结果智能分析系统
登记号:2007SR08144
9、软件名称:   金属连续塑性成型CAD模型参数生成系统
登记号:2007SR08145
10、软件名称:   金属材料塑性成形微观组织分析系统
登记号:2008SR07604
11、软件名称:   ERW工艺参数管理设计系统
登记号:2008SR04698
学术兼职
2007―2011   中国机械工程学会塑性工程分会塑性加工理论与数字化技术学术委员会委员
2007―2016  中国力学学会第二届促进工程应用与产业结合工作委员会
荣誉奖励
2009    上海青年科技启明星跟踪计划
2007    教育部新世纪优秀人才
2007   上海市科技进步一等奖
2006    上海市青年科技启明星计划
2010    上海市青年科技启明星跟踪计划 
2011    学院最受欢迎的研究生导师
2011    上海国际工业博览会铜奖
2013    教育部科技进步一等奖
2014    国家科技进步二等奖
2015    上海国际工业博览会创新奖
已上传文件
[科研项目] 近年主要成果
Email:sjtume@sjtu.edu.cn
地址:上海市东川路800号闵行机械群楼 邮编:200240
Copyright © 2012-2013.
上海交通大学机械与动力学院    版权所有