当前位置:首页 > 师资队伍 > 教师名录
张雪萍    
副教授    
    
办公电话    
021-34206799
通讯地址    
上海交大机械与动力工程学院A楼710室
电子邮件    
个人主页    
教育背景
时间
毕业院校
学历
1998-2002
上海交通大学
博士
1995-1998
郑州大学 (原郑州工业大学)
硕士
1991-1995
东北林业大学
学士
工作经历
2002-2005   上海交通大学 机械与动力工程学院    讲师                               
2005-至今   上海交通大学 机械与动力工程学院    副教授

   
出访及挂职经历
2006.6-2006.9         澳大利亚 拉筹伯大学                访问学者
2009.4-2009.10        美国 普渡大学                      访问学者 
2013.1-2013.12        美国 俄亥俄州立大学                访问学者
研究方向
1、精密加工表面完整性建模与控制
2、抗疲劳性能制造工艺方法研究
科研项目
2017-2020:国家自然科学基金项目,NSFC No.51675339,负责人
2016-2017:上海汽车工业科技发展基金,No.1614,负责人
2016-2017:机械系统与振动国家重点实验室2016年度自主课题重点课题,No.GKZD020021/006,负责人
2016-2020:国家自然科学基金重点项目,NSFC No.51535007,骨干研究人员
2015-2018:国家自然科学基金项目,NSFC No.51474299,骨干研究人员
2012-2015:国家自然科学基金项目,NSFC No. 51175331,负责人
2012-2014:上汽通用五菱,SGMW发动机精密制造技术(2微米工程)项目,骨干研究人员
2012-2014: “十二五”国家科技支撑计划,No.2012BAF06B03,骨干研究人员
2013-2014:上海汽轮机厂有限公司科研项目,负责人
2012-2013:上海轴承研究所科研项目,负责人
2008-2010:国家自然科学基金项目,NSFC No. 50705061,负责人
2009-2010:轴套类精密复合数控磨床, 国家项目, 副组长
2009-2012:国际合作项目(合作单位:佐治亚理工),负责人
2007-2009:**操控性和可靠性的分析研究,国家项目,骨干研究人员
2006年: ××动平衡支承技术研究, 国家项目,负责人;
2006年: ***多体转动部件的耦合动力学分析,国家项目,负责人;
代表性论文专著
编著:
1.姚振强,张雪萍.《敏捷制造》,机械工业出版社,2004.8(第一版).书号:ISBN 7-111-14628-X/TH.1470.

论文:
1)Xueping Zhang, Xiaoqin Wang, Daming Wang, Xiaojuan Wang, Zhenqiang Yao, Lifeng Xi. Methodology to improve the cylindricity of engine cylinder bore by honing. Transactions of ASME, Journal of Manufacturing Science and Engineering. 138,2016(Doi: 10.1115/1.4034622).

2)Xueping Zhang, Rajiv Shivpuri, Anil K. Srivastava. Chip Fracture Behavior in the High Speed Machining of Titanium Alloys. Transactions of ASME, Journal of Manufacturing Science and Engineering. 138(8), 081001:1-14,2016.

3) Xueping Zhang, Shubiao Wu. Chip Control in the Dry Machining of Hardened AISI 1045 Steel, The International Journal of Advanced Manufacturing Technology, PP.1-9, 20 June, 2016. (Doi: 10.1007/s00170-016-8989-2).

4) Xueping Zhang, Rajiv Shivpuri, Anil Srivastava. Microstructure sensitive flow stress based on self-consistent method. Proceedings of the ASME International Manufacturing Science and Engineering Conference. June 27-July 1, 2016, Blacksburg, Virginia, USA . (ASME-MSEC 2016-8708).

5) Xueping Zhang, Shubiao Wu, Zhenqiang Yao, Lifeng Xi., High speed machining of hardened AISI 1045 steel, the 12th Asia-Pacific Conference on Materials Processing, Jinan, China, 16-19 June, 2016.

6)Xueping Zhang, Rajiv Shivpuri, Anil Srivastava. Role of tool flank wear and machining speed in developing of residual stresses in machined surface during high speed machining of titanium alloys. Proceedings of the 2015 ASME International Manufacturing Science and Engineering Conference. June 8-12, 2015, Charlotte, North Carolina, USA.

7)Rajiv Shivpuri, Xueping Zhang, Anil Srivastava. Investigation of Material Transformations and their Role in Residual Stress Development in Machined Surfaces, 4th International Conference on Virtual Machining Process Technology (CIRP Sponsored Conference), June 2-5, 2015, Vancouver, BC, Canada.

8)Xueping Zhang, Rajiv Shivpuri, Anil K. Srivastava. Role of phase transformation in chip segmentation during high speed machining of dual phase titanium alloys. Journal of Materials Processing Technology. Vol. 214, 2014(12): 3048-3066.

9)Xueping Zhang, Rajiv Shivpuri, Anil K. Srivastava. Stress triaxiality in chip segmentation in the high-speed machining of titanium alloy. Proceedings of the 2014 ASME International Manufacturing Science and Engineering Conference June 9-13, 2014, Detroit, Michigan, USA. Manuscript No. MSEC2014-3915.

10)Liang Ding, Xueping Zhang, C.Richard Liu. Dislocation density and grain size evolution in the machining of Al6061-T6 alloys. Transactions of ASME, Journal of Manufacturing Science and Engineering, 2014, DOI: 10.1115/1.4027675.

11)Xia Ji, Beizhi Li, Xueping Zhang, Steven Y. Liang. The effect of minimum quantity lubrication (MQL) on machining force, temperature, and residual stress. International Journal of Precision Engineering and Manufacturing. Vol.15 (11), 2014. p.2443-2451.

12)Xia Ji, Xueping Zhang, Steven Y. Liang, Predictive modeling of residual stress in minimum quantity lubrication machining. The International Journal of Advanced Manufacturing Technology. 2014,Vol.70, Issue 9-12(2): 2159-2168.

13)Long Meng, Xueping Zhang, A.K.Srivastva. Rapid Finite Element Prediction on Machining Process, 2013 ASME International Conference on Manufacturing Science and Engineering. June 10-14, 2013, Madison, Wisconsin, USA.

14)Liqiang Ding, Xueping Zhang, C.Richard Liu. Finite Element on Dislocation Density and Grain Size Evolution in Machined Surface, 2013 ASME International Conference on Manufacturing Science and Engineering. June 10-14, 2013, Madison, Wisconsin, USA

15)Xia Ji, Xueping Zhang, Beizhi Li, Steven Y. Liang. Predictive modeling of minimum quantity lubrication: cutting forces, temperature and residual stress. Applied Mechanics and Materials, 2013, Vols. 365-366: 1181-1184.

16)Xueping Zhang, Shenfeng Wu, C. Richard Liu. Decomposing Thermal and Mechanical Effect on the Residual Stress Profile in Hard Turning Surface by Finite Element Method, 2012 ASME International Conference on Manufacturing Science and Engineering. June 4-8, 2012, Notre Dame, Indiana, USA.

17)Xia Ji, Xueping Zhang, Y. Steven Liang. A New Approach to Predict Machining Force and Temperature with Minimum Quantity Lubrication, 2012 ASME International Conference on Manufacturing Science and Engineering. June 4-8, 2012, Notre Dame, Indiana, USA.

18)Xiaojin Xu, Liang Ding, Xueping Zhang. Multi-scale FE modeling Inconel718 machining process and Crack initiation of brittle particle, the 10th Asia-Pacific Conference on Materials Processing, Jinan, China, 14-17 June 2012.

19)Zhang Xueping, Wu Shenfeng, C.Richard Liu. The periodical fluctuation residual stress in hard turned surface and its relationship with chip formation, ASME MSEC 2011, ( MSEC2011-50197)

20)Zhang Xiangqin, Zhang Xueping, Anil, K. Srivastava. Predicting the high speed cutting process of Titanium alloy by Finite Element Method. ASME MSEC 2011, ( MSEC2011-50208).

21)Xia Ji, Zheng Kang, Xueping Zhang, Steven Y.Liang. A New Methodology to Validate the Cutting Temperature Theoretical Model in Super-finish Hard Machining, Advanced Science Letters,Numbers 4-5, 2011, 1561-1565

22)Xueping ZHANG, Shenfeng WU, Heping WAHNG and C. Richard LIU Predicting the effects of cutting parameters and tool geometry on hard turning process using Finite Element Method, ASME Transaction, Journal of Manufacturing Science and Engineering, Vol.133, Iss.4, 2011, 041010.

23)Kang zheng, Ji Xia, Zhang Xueping, Y.Steven Liang, Theoretical modeling of cutting temperature distribution by considering the material thermal properties as a function of temperature, ASME MSEC 2011, (MSEC2011-50216).

24)Zhang Xueping, Wang Heping,C.Richard Liu, On predicting tool nose radius and lead angle on hard turning process by 3D finite element method, 2010 ASME International Conference on Manufacturing Science and Engineering. October 12-15, 2010, Bayfront Convention Center, Erie, PA

25)Wang Heping, Wu Shenfeng, Zhang Xueping, C.Richard Liu. On predicting residual stress and chip morphology in pre-strain hard turning, 2010 ASME International Conference on Manufacturing Science and Engineering. October 12-15, 2010, Bayfront Convention Center, Erie, PA

26)Wu Shenfeng, Zhang Xueping, C.Richard Liu. On predicting rake angle cutting speed and feed rate on chip morphology in hard turning, 2010 ASME International Conference on Manufacturing Science and Engineering. October 1-15, 2010, Bayfront Convention Center, Erie, PA

27)Wang Heping, Zhang xueping. Thermal-mechanical Effect on Temperature/stress Distribution when Orthogonal Cutting Bearing Steel. Progress of Machining Technology. 420-424. Key Engineering Materials Vols. 407-408, 2009.

28)Lu Guanghui, Zhang Xueping, Gao Erwei. Experimental Study on the Surface Residual Stresses of GCr15 Component by Super-finishing Grinding and Fatigue Life Prediction, Key Engineering Materials Vol.416(2009)pp 45-50.

29)X.P.Zhang, Erwei Gao, C.Richard Liu. Optimization of Process parameter of residual stresses for hard turned surfaces, Journal of Materials Processing Technology, Volume 209, Issue 9, 1 May 2009, 4286-4291)

30)Ding Kui, Zhang Xue-ping, Hu Jun. Et al. Experimental Research on Sliding and Wear Mechanism of Nickel-coated and Uncoated High Speed Tool Steel against Backing of Abrasive Belt. Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing , September 23-26, 2008, Tianjin, China

31)Gao Erwei, Zhang Xueping, Yao Zhenqiang. Simulation and Analysis of Flexible Solar Panels’ Deployment and Locking Processes, Journal of Shanghai JiaoTong Univ. (Sci.),2008,13 (3):275-279.

32)X.P.Zhang, C.R.Liu, Z.Q.Yao. Experimental study and evaluation methodology on hard surface integrity【J】.International Journal of Advanced Manufacturing Technology, 2007,34(8):141-148.

33)Song hechuan, Zhang Xueping, Yao zhenqiang. Nonlinear Contact Modeling and Numerical Analysis of Tapered Roller Bearing Based on Integrated application of CAD/CAE Softwares, 7th International Conference on Frontiers of Design and Manufacturing ,The Joint of “7th Youngs Scientist Conference on Manufacturing “ and “7th S.M.Wu Symposium on Manufacturing Science”, June 19-22,2006 Guangzhou, China.

34)X.P.ZHANG, H.C.Song, C.R.Liu. White Layer of Hard Turned Surface by Sharp CBN Tool【J】. Journal of Shanghai Jiao Tong University (Science), 2005, 36(4): 377-38620)

35) X.P.Zhang, W.Q.Fan, T.Yu, Z.Q.Yao. Methodological Optimization Design on Rolling-contact Bearing Clearance, New Trends in Engineering Design, Proceedings of 15th International CIRP Design Seminar 2005, May 22-26, 2005, Shanghai, China, 446-450.

36)X.P.Zhang, C.R.Liu, Z.Q.Yao. Investigational Advances in Residual Stresses by Hard Turning,Materials Science Forum-Advances in Materials Manufacturing Science and Technology, 2004,471-472 (9): 523-527

37)X.P.ZHANG, AHMED Hassan,Z.YAO. Multi-body Contact Modeling and Statistical Experimental Validation for Hub Bearing Unit 【J】,Tribology International,2003,36(7):505-510.

38)高罗辉,张雪萍,姚振强. 汽车发动机缸孔珩磨轨迹重构与精度控制. 机械设计与研究,2013,29 (1):75-79.
39)丁利强, 张雪萍, 姚振强. 汽车曲轴磨削精度的控制方法,机械设计与研究,2013,29(3) 66-69.
40)张相琴,张雪萍,A.K.Srivastava. Ti6Al4V高速干切削试验与有限元建模,机械设计与研究,Vol.28, 2012(4):101-106.
41)李振,张雪萍,C.R. Liu.轴承钢硬车削表面残余应力对滚动接触界面疲劳寿命的影响预测,上海交通大学学报,2011,45,66-71.
42)吴申峰,张雪萍. 淬硬轴承钢锯齿形切屑形成机理研究,上海交通大学学报,2011,45(1):85-92
43)王和平,吴申峰,张雪萍. 高速干切削过程的三维有限元仿真与试验分析,机械设计与研究,2011, 27(1): 67-73.
44)张雪萍,王和平,卢光辉,高二威. 轴承钢顺次磨削表面残余应力离散度试验研究, 机械工程学报, 2010, 46(15): 89-94.
45)张雪萍,王和平,高二威.基于Deform的单粒磨削仿真与工件表面残余应力离散度分析,上海交通大学学报,2009,43,717-721.
46)张雪萍,赵国伟,蒋辉等. 精密干切削淬硬零件表面完整性试验【J】,上海交通大学学报,2006,40(6):0922-0926.
47)张雪萍,刘中鸿,刘龙权. 滚动轴承超精硬切削参数的优选方法体系,上海交通大学,2004,37(7):80-84.
48)张雪萍,刘中鸿,刘龙权. 有利于提高硬切削滚动轴承疲劳寿命的残余应力临界条件,工具技术,2004,38(5):19-21.
教学工作
1、课程名称:机械制造(1)基础 ME373(in English);  授课对象:本科; 学时:64;  学分:4
2、课程名称:塑性加工理论 ME26018(in English);授课对象:研究生;学时:48;  学分:3
3、课程名称:先进制造技术 P020565; 授课对象:工程硕士; 学时:36; 学分:2
4、课程名称:专业外语 Z140502(in English);授课对象:工程硕士;学时:18;学分:1
软件版权登记及专利

学术兼职
美国机械工程师协会(ASME)会员
荣誉奖励
已上传文件
Email:sjtume@sjtu.edu.cn
地址:上海市东川路800号闵行机械群楼 邮编:200240
Copyright © 2012-2013.
上海交通大学机械与动力学院    版权所有