其他栏目
学术报告
林栋博士学术报告会
作者:发布时间:2017-08-08

林栋(Dong Lin)博士,堪萨斯州立大学Assistant Professor于2013年获得美国普渡大学博士学位。2013-2015期间在普渡大学从事博士后研究。2015年至今于堪萨斯州立大学担任助理教授。主要研究方向为:金属3D打印,超轻多功能材料3D打印,仿生材料3D打印,以及连续碳纤维复合材料3D打印,研究成果发表在ACS Nano, Advanced Materials,Small,Acta Materialia,Scientific Reports期刊上。其中2016年发表于Small上的文章被评为当年该期刊最热文章第一名。曾获得包括堪萨斯州立大学The Big 12 Faculty Fellowship Award在内的多项奖励。

 

报告题目:
1. Improving fatigue performance of additive manufactured metal structures by ultra-stable microstructures

2. 3D freeze assembling printing of graphene aerogel

报告时间:2017年8月9日(周三) 9:30-12:00。

地 点: 机械与动力工程学院 A701

 

学术报告题目1:

Improving fatigue performance of additive manufactured metal structures by ultra-stable microstructures.

 

Abstract: Currently, additive manufacturing is a popular topic, while laser based additive manufacturing is the most applied technique for metal based additive manufacturing. Laser based additive manufacturing can be used to print complex, hard machining materials and large components. However, the major issue for laser based additive manufacturing is that it introduces thermal tensile stress, which decreases fatigue life of metal components. Fatigue is responsible for 90% of metal failure. In order to improve fatigue life of metal component, a two-step manufacturing technology, including laser sintering plus laser shock peening (LSP), was proposed. First, 0D (Nanoparticles), 1D (carbon nanotube) and 2D (graphene or graphene oxide) nanomaterials were integrated into metal matrix by laser sintering. Then laser shock peening was performed to introduce high density of dislocations and novel microstructures. Compressive residual stress and surface work hardening were also introduced by LSP. The interaction between dislocations with nanomaterials helped block dislocation movement, thus stabilizing residual stress and work hardening. The stabilized work hardening and residual stress increased the resistance for crack initiation and crack propagation, so that we can greatly improve fatigue life.

 

学术报告题目2:

3D freeze assembling printing of graphene aerogel

 

Abstract: The surging field of graphene aerogels (GA) provides a promising methodology for transferring inherent properties of graphene into macroscopic applications for composite materials, energy storage, stress sensor, thermal insulator, and shock damping. However, fabrication of GA with tailored macrostructures by scalable and controllable methods remains a significant challenge. The vision of tailoring macroarchitecture of GA for specific applications, including separation, all-solid-state batteries, micro pressure sensors, flexible electrodes, and electrochemical catalyst templates, has stimulated the research on 3D printing of GA. Here, we propose a printing methodology that contines multinozzle drop-on-demand inkjet printing of pure graphene oxide (GO) suspension with freeze casting for rapid printing of 3D GA architectures to achieve several key qualities, namely, pure, continuous, boundary free, controlled microstructure, and truly 3D architectures (e.g., 3D truss with overhang structures). To date, we have successfully printed world’s lightest material via 3D printing through the proposed technique.

Copyright © 2016 上海交通大学机械与动力工程学院 版权所有
分享到

Email:sjtume@sjtu.edu.cn
地址:上海市东川路800号上海交通大学闵行校区机械与动力工程学院
邮编:200240